Tube Inspection Services
Acoustic Eye System™
Acoustic Eye™ provides non-invasive tube inspection solutions to the heat exchanger market. Utilising breakthrough acoustic-based technology, this solution revolutionises the way companies perform heat exchanger maintenance. With Acoustic Eye™, you can test 100% of your tubes at a fraction of the time and cost of your current maintenance budget and avoid costly downtime due to failures in your mission-critical equipment.
The system is based on the principles of Pulse Reflectometry, using sound waves emitted from a probe at the mouth of the tube. These propagate down the tube and reflect back where they are received and recorded. The results are then analysed by specialist software to monitor for any change in the tubes cross section that may indicate holes, pitting, bulges, erosion and partial/full blockages. These suspected defects can then be reviewed by the operator for inclusion in or exclusion from the final report.
Compatible with any tube material and any configuration (bends, U-tubes, fin tubes, spirals, etc.)
Eddy Current Tube Inspection
NDT inspection services for tube bundles to include heat exchangers, condensers, oil coolers, air conditioning units. .
Eddy current is based on the principle of measuring changes in the impedance of an electromagnetic coil as it is scanned over a surface of conductive material.
Using eddy current inspection techniques you can quickly detect tube corrosion, pits, wall loss and cracks.